2. Making System Booting Media

2.1. Update VAB-600 Firmware

Steps for Firmware update:

1. Unpack the firmware installer image file to SD card.
2. Power off VAB-600
3. Insert SD card
4. Power on VAB-600
5. The installer will update firmware automatically
6. Remove SD card when update is finished
7. System will reboot in 3 seconds

2.2. 2.2. Change U-boot default configuration

1. Open [firmware installer image]/bspinst/bspinst.cfg file.
2. Find section [VIA_RDK]
3. Disable default setting by adding the remark “#”
4. Change to new setting by removing the remark “#”

For example, change HDMI to LVDS. Default:

# HDMI
setenv wmt.display.param 4:6:1:1280:720:60
# LVDS
#setenv wmt.display.param 2:0:24:800:480:60

Change to:

# HDMI
#setenv wmt.display.param 4:6:1:1280:720:60
# LVDS
setenv wmt.display.param 2:0:24:800:480:60