2.1. Display parameters

wmt.display.default.res

Todo

Check valid parameters.

wmt.display.dual

Dual-display support, 0 is single display, 1 is dual display. Does not necessarily work with all possible display types (see types below).

wmt.display.dvi.dev

Todo

Check valid parameters.

wmt.display.hdmi.vmode

Todo

Check valid parameters.

wmt.display.hdmi_audio_inf

Todo

Check valid parameters.

wmt.display.logoaddr

Boot up logo loading address. Example: setenv wmt.display.logoaddr 0x0.

Todo

Figure logo address out.

wmt.display.param

Display settings, for example setenv wmt.display.param 4:6:1:1920:1080:60. The options follow as type:op1:op2:resx:resy:fps.

param type:Output type, acceptable values are listed below param op1:Option 1 (?) param op2:Option 2 (?) param resx:Horizontal number of pixels for the monitor param resy:Vertical number of pixels for the monitor param fps:Monitor update rate in Hz, eg. 60, or 75.

The acceptable types are:

Types	Meaning
0	VOUT_SD_ANALOG, ?
1	VOUT_SD_DIGITAL, ?
2	VOUT_LCD, ?
3	VOUT_DVI, DVI output
4	VOUT_HDMI, HDMI output
5	VOUT_DVO2HDMI, ?
6	VOUT_LVDS, LVDS output
7	VOUT_VGA, VGA output
8	VOUT_BOOT, boot time, special case for boot logos
9	VOUT_MODE_MAX, ?
10	VOUT_MODE_ALL, equal to VOUT_MODE_MAX

wmt.display.param2

Todo

Check valid parameters.

wmt.display.pwm

Possibly LCD backlight setting.

wmt.display.regop

Todo

Check valid parameters.

wmt.display.tmr

Todo

Check valid parameters.

wmt.display.upbound

Todo

Check valid parameters.